Table of Contents
Advertisement
Adjusting the convergence manually
1
After selecting
"CONVERGENCE", move
up or down to select
"MANUAL ADJUST", then
press
.
The cross pattern appears
on the screen.
2
Move
up, down, left or
right to adjust the red
lines until they converge
with the green lines, then
press
.
3
Move
up, down, left or
right to adjust the blue
lines until they converge
with the center cross
pattern, then press
To return to the normal screen
Press MENU.
Tip
• Selecting "DIGITAL QUICK FOCUS" under "CONVERGENCE" allows
Notes
• Adjust convergence about 20 – 30 minutes after the projection TV is first
• You cannot use the VOLUME +/– buttons on the projection TV for
.
you to adjust the convergence automatically. When the Digital Quick
Focus feature is performed, manual adjustment values are erased.
turned on.
manual convergence adjustment.
ADJUST : < ,Mm NEXT COLOR :
ADJUST : < ,Mm
FINISH :
continued
Adjusting Your Setup (MENU)
59
Advertisement
Table of Contents
