Adjusting The Convergence Manually - Sony WEGA KP-FX43 Operating Instructions Manual

Changing the "SETUP" setting (continued)

Adjusting the convergence manually

1
After selecting
"CONVERGENCE", move
up or down to select
"MANUAL ADJUST", then
press .
The cross pattern appears
on the screen.
2
Move up, down, left or
right to adjust the red
lines until they converge
with the green lines, then
press .
3
Move up, down, left or
right to adjust the blue
lines until they converge
with the center cross
pattern, then press
To return to the normal screen
44
Adjusting Your Setup (MENU)
.
Press MENU.
Tip
• Selecting "DIGITAL QUICK FOCUS" under "CONVERGENCE" allows
you to adjust the convergence automatically. When the Digital Quick
Focus feature is performed, manual adjustment values are erased.
Notes
• Adjust convergence about 20 – 30 minutes after the projection TV is first
turned on.
• You cannot use the 2 +/– buttons on the projection TV for manual
convergence adjustment.
ADJUST : < ,Mm NEXT COLOR :
ADJUST : < ,Mm FINISH :