Communication; Rs232 And Usb; Ups Remote Control Functions - AEG PROTECT 1 LCD User Manual

6 Communication

6.1 RS232 and USB

1. Communication cable to the serial or USB port on the computer.
2. Connect the other end of the communication cable to the RS232 or USB
communication port on the UPS.
6.2 UPS remote control
functions
Remote Power Off (RPO Remote Power Off (RPO
• Remote Power Off (RPO Remote Power Off (RPO
When RPO is activated, UPS will cut off output immediately, and continues to
alarm.
RPO RPO
RPO RPO
Connector type
External breaker specification
：
Reset
1. Check the RPO connector status;
2. Clear fault state through LCD.
Dry in Dry in Dry in Dry in
•
Dry in function can be configured. (see Settings > Dry in)
Dry in Dry in Dry in Dry in
Connector type
External breaker specification
）
Comments Comments
Comments Comments
16 AWG Maximum wires
60 V DC/30 V AC 20 mA max
Comments Comments Comments Comments
16 AWG Maximum wires
60 V DC/30 V AC 20 mA max