Symbols; Designations - Aventics Marex ECS Assembly Instructions Manual

6 AVENTICS | ECS Actuator | R417002911–BDL–001–AA
About this documentation
Table 2: Hazard classes according to ANSI Z535.6-2006
Warning sign,
Signal word
DANGER
WARNING
CAUTION
NOTICE

1.3.2 Symbols

The following symbols mark notices which are not relevant to
safety but contain useful knowledge for the proper operation of
the product.
Table 3: Meaning of symbols
Symbol Meaning
If this information is not observed, the optimal use or
operation of the product cannot be ensured.
Single, independent step
1.
Numbered instructions:
2.
3. The numbers indicate the steps which must be executed
in a given order

1.3.3 Designations

The following abbreviations are used in these assembly
instructions:
Meaning
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation which,
if not avoided, could result in death or
serious injury.
Indicates a hazardous situation which,
if not avoided, could result in minor or
moderate injury.
Property damage: The product or the
environment may be damaged.