About This Documentation; Validity Of The Documentation; Required And Additional Documentations - Aventics Marex ECS Assembly Instructions Manual

4 AVENTICS | ECS Actuator | R417002911–BDL–001–AA

About this documentation

1 About this documentation
1.1

Validity of the documentation

These assembly instructions apply to the following products:
R417002894 Marex ECS Actuator 12 V DC
R417002895 Marex ECS Actuator 24 V DC
The Marex ECS Actuators 12 V DC and 24 V DC are part of the
Marex ECS ship control system. Unless otherwise stated in this
documentation, the designation "Marex ECS Actuator" applies
for the product versions 12 V DC and 24 V DC.
These assembly instructions are intended for mechanics and
service technicians.
These assembly instructions contain important information for
properly and safely installing, starting up, maintaining and
dismantling the Marex ECS Actuator.
Read these assembly instructions completely, especially the
chapter 2, Safety instructions, before working with the product.
1.2

Required and additional documentations

Before powering up the product, make sure to read and
understand the necessary documents.
Observe the instructions for the other system components.
Observe the boat's operating instructions.
Table 1: Required and additional documentations
Titel
Marex ECS
Document No.
R419302113
Document Type
Quick Guide