6.4 Power meter
Connecting the current sensor in the following steps:
1. Attach a current sensor to the L cables of the main earth leakage circuit breaker,
Clamp the current sensor and make sure that the direction is correct.
2. Connect one end of the current sensor cable to the current sensor connection
terminal and the other end to the Meter terminal in the junction box of inverter.
Battery
COMM. module
Figure 6-2 : Digital input on COMM. module
Figure 6-3 : Power meter
METER
(Step2)
29
Active/Reactive Power Control
N
L
(Step1)
(Step2)
local load