I/O Locations And Functional Descriptions - FujiFilm XG5000 Service Manual

1.4.3 I/O Locations and Functional Descriptions
 I/O Locations: Cassette Set Unit and Feed/Load Conveyor Unit
Locations of the sensors and barcode reader are illustrated below.
011-207-07E
02.19.2007 FM5097
A list of sensor and barcode reader names and functions is presented below.
 Cassette set unit
Symbol Name
SA1, 7, 13, 19 Cassette ejection
sensor
SA2, 8, 14, 20 Cassette IN sensor
SA3, 9, 15, 21 Cassette hold sensor
SA4, 10, 16, Suction cup HP sensor
22
SA5, 11, 17, Suction sensor
23
SA6, 12, 18, Inch/metric sensor
24
BCRA1, 2, 3, 4 Barcode reader
 Feed/load conveyor unit
Symbol Name
SB1, 2, 3, 4 IP feed/load sensor
(cassette side)
SB5 Pre-BCR IP sensor
SB6 Pre-convergence IP
sensor
SB7, 8, 9 Path changeover shelf
sensor
SB10 Convergence path
changeover sensor
SB11 Path changeover HP
sensor
CR-IR 362 Service Manual
MD-6
Type Function
PI (5mm) Detects that the cassette has
been ejected.
PI (5mm) Detects that the cassette has
been inserted.
PI (5mm) Detects that cassette hold has
been completed.
PI (5mm) Detects that the suction cup
arm is in its home position.
Suction Detects that the suction cup
sensor has sucked the IP.
PI (5mm) Determines the IP width.
Scans the barcode of a dual-
surface IP cassette.
Type Function
PI (19mm) Detects that an IP being
conveyed is present.
PI (19mm) Detects that an IP being
conveyed is present.
PI (19mm) Detects that an IP being
conveyed is present.
PI (5mm) Detects the position of the path
changeover guide.
PI (5mm) Detects the position of the
convergence path changeover
guide.
PI (5mm) Detects the machine's initial
position and the position of the
path changeover guide.
MD-6