Page 1
TF2200RW Product & Installation Manual TF2200RW – Off White Electric Radiant Heater With Remote www.heatstrip.com.au Ph: 03 9562 3455 E: sales@thermofilm.com.au...
Page 2
Supplied with 1.5m lead and plug and mounting brackets for DIY installation. • Direct overhead ceiling mounting is the preferred mounting method. Specifications Model TF2200RW Heater Type Electric radiant overhead heater Power 230-240 Volts Nominal at 50-60Hertz, Single Phase, 2200Watts, 9.2 Amps Connection 1.5M long 3 Core Cable 2.5mm...
Page 3
HEATSTRIP® TF2200RW TF2200RW is a custom designed and manufactured heater. It has been designed for ease of use and to provide low running cost. It provides 3 levels of temperature control, Adjustable set timer option from 0-24 hours with the touch of a button.
Remote Control Operation Receiver is located on the heater. Signal Transmitter LED / Control Panel • To use the remote controller, aim the transmitter to the heater. A line of sight transmission is required for the unit to function. • The controller does not have a protection rating.
Page 5
Installation Requirements The ideal mounting position for the heater is on the ceiling directly above the area to be heated. If this is not possible, the heater can be mounted on a wall and angled downwards. In this situation, ensure the mounting height is in the range of 2.1m to 2.4m and the table is within 1.0m of the wall.
Installation location the diagrams below provide the minimum recommended clearances in (mm). — WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small leaving the room on their own, unless constant supervision is rooms when they are occupied by persons not capable of provided.
Standard Mounting Brackets The HEATSTRIP® TF2200RB comes with a pair of standard mounting brackets. These adjustable brackets allow direct ceiling or wall mount, and come with preset angle options of parallel, 22.5˚ ˚ and 45˚ . “X” MODEL MINIMUM DISTANCE (mm)
Page 8
2x TF2200RW Safety The TF2200RW has an IP rating of X4. This means it is protected against water splashed from all directions but limited water ingress is permitted. The TF2200RW has undergone extensive testing both in laboratory conditions, in Thermofilm’s manufacturing fa- cility and field trials in Australia and overseas.
Thermofilm warrants to the original owner that HEATSTRIP Elegance products will be free from defects in materials and workmanship for a period of 12 months from the date of purchase for residential applications and 12 months for commercial applications in accordance with the following warranty terms and conditions.