Related Manuals for HEATSTRIP THE3200R
Summary of Contents for HEATSTRIP THE3200R
- Page 1 Elegance with Remote & App Control (THE-RA) Product Manual HEATSTRIP® Elegance With Remote & App (THE-RA) www.heatstrip.com.au Ph: 03 9562 3455 E: sales@thermofilm.com.au...
- Page 2 RECOMMENDED ceiling heights, units can be lowered using optional MAXIMUM bracket kits or refer to the HEATSTRIP Max range) Suitable for ceiling, wall, beam, fixed umbrella and recess mounting. Also MOUNTING OPTIONS available for extension mount using rigid fixing poles and chains / wire suspension.
- Page 3 180 hours x $2.78 = $500.40 yearly running cost for outdoor gas heater 180 hours x $0.60 = $108.00 yearly running cost for 2400W HEATSTRIP Elegance 180 hours x $0.80 cents = $144.00 yearly running cost for 3200W HEATSTRIP Elegance...
-
Page 4: Spot Heating Principle
Option 1 and 2 show a comparison between heating an entire area or spot heating over a table. ® The bottom layout shows the flexibility of using HEATSTRIP to provide a comfortable environment, even when the layout of the area is very unusual. -
Page 5: Radiant Footprint
Radiant footprint ® HEATSTRIP electric heaters produce radiant heat which heats objects rather than the air. Therefore, it is imperative that objects to be heated (ie. people), are within the direct radiant footprint of the heater. The diagram to the right shows the radiant footprint of ®... -
Page 6: Selection Guide
® The table below outlines the maximum coverage of each HEATSTRIP Elegance with Remote and App control model based on 2 different scenarios with direct overhead mounting at minimum installation height. For example, for an outdoor area that is protected from prevailing winds by walls, café... - Page 7 The diagrams below provide an easy selection guide for the approximate model and quantity of heaters required to heat common residential table settings. ® Selections are based on HEATSTRIP Elegance with Remote and App Control being mounted at 2.4m from the floor in a fully enclosed undercover outdoor area.
-
Page 8: Installation Requirements
For mounting heights more than 2.7m, we recommend the use of the optional accessories to reduce the ® height of the heater to 2.3m—2.5 m. This will increase the effectiveness of your HEATSTRIP . Refer to the Mounting Accessory section for more information. -
Page 9: Installation Location
Installation location —the diagrams below provide the minimum recommended clearances in (mm). WARNING: This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided. -
Page 10: Mounting Options
Mounting options ® Installing the HEATSTRIP Elegance with Remote and App Control is simple and easy using the standard mounting brackets supplied. For other irregular locations there are range of mounting options available - refer to diagrams below ® The HEATSTRIP Elegance with Remote and App Control can be mounted directly to the ceiling, angled downwards on a wall, fitted flush with the ceiling, attached to beams or poles or suspended by rods, wires or chain . -
Page 11: Standard Mounting Brackets
Standard mounting brackets ® The HEATSTRIP Elegance with Remote and App Control comes with a pair of standard mounting brackets. These adjustable brackets allow direct ceiling, wall or pole/beam mounting, and come with pre-set angle options of parallel, 22.5° and 45°. -
Page 12: Flush Mount Enclosure
Flush mount enclosure ® The Flush Mount Enclosure is an ideal way to neatly install the HEATSTRIP into a ceiling. They are available for all ® HEATSTRIP Elegance with Remote and App Control models, and are supplied as a one-piece unit suitable for mounting individual heaters. -
Page 13: Extension Mount Bracket
Extension Mount Bracket ® The Extension Mount bracket allows HEATSTRIP Elegance units to be lowered from high ceilings using rigid connections. The standard length options as part of the kit are 300mm, 600mm, 900mm and 1200mm. The kits include all brackets, poles and screws necessary for connection to the heaters, however it does not include screws for attachment to the ceiling. - Page 14 Thermofilm does not provide any dedicated installation kit for this type of mounting, however the following infor- ® mation may be used to assist in safely installing the HEATSTRIP Elegance with Remote and App Control. Any chain or wire must be suitably rated to withstand the weight of the heater.
- Page 15 THE-RA Operation Control with Remote The THE-R is a custom designed and manufactured heater. It has been designed for ease of use and provide low running cost of your heater. It provides both temperature control (allowing the user to turn the heater output up or down depending on the ambient temperature and conditions) and a timer for automatic heater shut–...
-
Page 16: Remote Control Operation
Remote Control Operation Receiver • Receiver is located on the heater. Signal Transmitter • To use the remote controller, aim the transmitter to the heater. A line of sight Temperature Control Button transmission is required for the unit to function. •... - Page 17 (Make sure Wi-Fi is TuyaSmart App enabled) Once the power is switched on, hold the + button Connect the HEATSTRIP Heater to on the remote until the 3 Green LED lights are Power. (Either Plug-In or Hardwired) blinking CC. Open the App and Select Device Type select “Add Device”...
- Page 18 Pair the Google device to the Google Home App Once paired, click on the Tuya Smart App Select “Me” Select “Google Assistant” Select “Link with Google Assistant” Select “Agree and link” Choose device “Select HEATSTRIP Elegance with Remote and App Pairing completed...
-
Page 19: Maintenance
Carrying out the cleaning process at least every three months will ® reduce the amount of build up and keep the HEATSTRIP in good condition. If the heater is in a corrosive environment eg. -
Page 20: Warranty Terms And Conditions
Thermofilm warrants to the original owner that HEATSTRIP Elegance products will be free from defects in materials and workmanship for a period of 24 months from the date of purchase for residential applications and 12 months for commercial applications in accordance with the following warranty terms and conditions.
Need help?
Do you have a question about the THE3200R and is the answer not in the manual?
Questions and answers