Fixed Gobo Wheel - Elation FUZE MAX SPOT User Manual

G O B O I N S TA L L AT I O N - F I X E D G O B O W H E E L
Locate the tab of the Retention
Spring, and with a precision pick
(or similar tool), carefully press the
Retention Spring inward to relieve the
tension. Remove the retaining spring
and carefully separate the GOBO from
the GOBO Holder.
CAUTION: TAKE CARE NOT TO SCRATCH GOBO OR GOBO HOLDER
To ensure proper Gobo orientation on the Fixed Gobo Wheel, align the orientation indices
before installing the Retention Spring. These indices are the notch in the Gobo Holder and the
dot on the Gobo itself.
Install the Gobo Holder Tab
into the Gobo Holder Tab
Receptacle and press until
the Gobo Holder gently
springs into the empty
Gobo Holder Slot.
13
Locate the
Gobo being replaced.
Carefully press the
Gobo Holder down,
then pull it out and
away until it fully
clears the
Wheel.
Note that the Gobo Holder
does not straddle
Fixed Gobo Wheel in the
Gobo Holder Slot.The the
Retention Tab is on same
side as the Gobo Holder.
Fixed
GOBO
the