Elation FUZE MAX SPOT User Manual page 18

I N S TA L L AT I O N G U I D E L I N E S
OMEGA BRACKETS WITH CLAMP INSTALLATION
When mounting the fixture to a truss, be sure to secure an appropriately rated professional grade
rigging clamp to the included Omega Brackets using an M10 screw fitted through the center hole of
the Omega Brackets. Insert the Omega Brackets into the matching holes on the bottom of the
fixture. Secure the Omega Brackets to the fixture by turning each quick-lock fastener ¼ turn
clockwise; making sure the fastener is completely locked. Omega Brackets can be installed into
the fixture base as illustrated below.
*SAFETY CABLE*
ALWAYS ATTACH AN APPROPRIATELY RATED SAFETY CABLE WHENEVER INSTALLING
THIS FIXTURE IN A SUSPENDED ENVIRONMENT TO ENSURE THE FIXTURE WILL NOT
FALL IF THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including among others, calculating working
load limits, installation material being used, and periodic safety inspection of all installation
material and the fixture. If you lack these qualifications, do not attempt the installation
yourself. Improper installation can result in bodily injury. The fixture provides a built-in rigging
point for a SAFETY CABLE (not included). Be sure to only use one of the designated rigging point
for the safety cable and never secure a safety cable to a carrying handle. Connect the safety cable
to the attachment point and route it around the truss.
18