Page 2
Thank you for your trust and the purchase of our product. This user manual is supplied to help you use this product. The instructions should allow you to learn about your new product as quickly as possible. Make sure you have received an undamaged product. If you do find transport damage, please contact the seller from which you purchased the product, or the regional warehouse from which it was supplied.
Contents Contents SAFETY Admonitions ..........................Intended use ..........................Safety for children and people with disabilities................ General safety........................... Safety during installation ......................Safety during operation ......................Safety during maintenance ...................... Disposal............................. QUICK START GETTING STARTED Installation..........................Getting to know your washing machine................... Controls..............................
Page 5
Contents Bed linen ............................. Cotton ..............................Drum clean ............................ECO 40-60 ............................Intensive .............................. Mix ..............................My cycle .............................. Quick 15 min ............................Rinse & Spin ............................Spin only ............................. Synthetic .............................. Wool ..............................CLEANING Clean the exterior........................Clean the detergent dispenser....................Clean the drum .........................
Safety SAFETY Carefully read the instructions before you install and use the product. Save the instructions and keep them near the product for future reference. All kinds of warranties shall be invalid if these instructions are not followed. Admonitions WARNING! Used when there is a risk for personal injury.
Safety WARNING! The glass door may get very hot during operation. Keep children and pets well away from the product during operation. WARNING! All washing and additional substances are to be kept in a safe place out of the reach of children. General safety WARNING! •...
Page 8
Safety WARNING! Adequate ventilation has to be provided to avoid the back flow of gases into the room from appliances burning other fuels, including open fires. WARNING! • Remove all packaging and transport bolts before using the product. Otherwise, serious damage may result.
Safety Safety during operation WARNING! • Flammable, explosive or toxic solvents are forbidden. Gasoline and alcohol etc. must not be used as detergents. Only use detergents that are suitable for machine washing. • Never use flammable sprays or substances in the immediate proximity of the appliance. WARNING! •...
Safety WARNING! During operation, there may be hot water in the drain pump. Never remove the pump cover during a washing cycle, always wait until the product has finished the cycle and all water has been drained. WARNING! Never pour water over the appliance for cleaning purpose. Risk of electric shock! CAUTION! •...
Getting started GETTING STARTED Installation See section "Installation", page 31 Getting to know your washing machine Controls A. Programme selector B. Display C. On/Off D. Start/Pause E. Options, settings, and functions Symbols on the display Pre-wash Reload Door lock Child lock Extra rinse Cycle phase: Pre-wash Cycle phase: Wash Cycle phase: Rinse...
Getting started WARNING! Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc. must not be used as detergents. Only use detergents that are suitable for machine washing. Accessories A. Transport hole plugs B. Transport bolts C. Water supply hose Transport hole plugs For plugging the holes after the transport bolts have been removed.
Getting started Before first use Calibrate the machine Calibration optimizes the automatic load detection. This minimizes the consumption of energy and water, saves money and reduces the washing time. Make sure the machine is empty. 2. Plug in the power cord. 3.
Washing WASHING Before each wash Check the clothing care labels. 2. Remove any items from the pockets. CAUTION! Sharp and rigid items, such as coins, brooches, nails, screws or stones etc., may cause serious damage to this washing machine. 3. Tie any belts and fasten any zips or buttons. 4.
Washing 5. Add detergent and softener in the detergent dispenser if needed. NOTE! Make sure to use a detergent suitable for the the laundry to be washed and the selected washing programme and temperature. 6. Press to start the programme. When the washing is completed an acoustic signal sounds and End is displayed.
Washing Child lock Prevents accidental use of the machine. See section "Use the child lock", page Delay Delays the start of the washing programme by a specified amount of time. Maximum delay time is 24 hours. Extra rinse, Pre-wash, Speed wash, AUTO •...
Washing Use the Delay option Turn the programme selector to select a programme. 2. Change settings and select options if needed. 3. Touch to cycle through the available delay times. 4. Touch The washing cycle will start after the delay time has passed. You can cancel the delay timer by touching to cycle through the available delay times until the display shows 0H.
Washing NOTE! AUTO is on by default. is flashing, add liquid detergent and softener in the detergent dispenser. CAUTION! Do not fill above the maximum volume indicator, when adding detergent, softener or additives. NOTE! Touch and hold to turn off the AUTO function. Use the My cycle function You can save a frequently used programme for quick access.
Washing Maximum load, washing 4.0 kg Pre-wash detergent Main wash detergent Essential Softener Optional Options • Delay • Extra rinse Baby care Keeps the washing temperature above 60 °C for more than 30 minutes to remove harmful bacteria. Default temperature 60 °C Default time 1:42 Default speed 800 rpm...
Washing Cotton For hard-wearing, heat-resistant textiles made of cotton or linen. Default temperature 40 °C Default time 3:39 Default speed 1400 rpm Maximum load, washing 8.0 kg Pre-wash detergent Optional Main wash detergent Essential Softener Optional Options • Delay • Extra rinse • Pre-wash •...
Washing Pre-wash detergent Main wash detergent Essential Softener Optional Options • Delay Intensive The washing time is increased for better washing effect. Default temperature 40 °C Default time 3:48 Default speed 800 rpm Maximum load, washing 8.0 kg Pre-wash detergent Main wash detergent Essential Softener Optional...
Washing Default temperature Cold Default time 0:15 Default speed 800 rpm Maximum load, washing 2.0 kg Pre-wash detergent Main wash detergent Essential Softener Optional Options • Delay Rinse & Spin Extra rinsing and spinning. Default temperature Default time 0:20 Default speed 1000 rpm Maximum load, washing 8.0 kg Pre-wash detergent...
Washing Default temperature 40 °C Default time 3:18 Default speed 1200 rpm Maximum load, washing 4.0 kg Pre-wash detergent Optional Main wash detergent Essential Softener Optional Options • Delay • Extra rinse • Pre-wash • Soil level Wool Hand or machine washable wool or wool-rich textiles. Gentle washing programme designed to prevent shrinkage. Includes longer periods without drum rotation.
Cleaning CLEANING Correct maintenance of your product can extend its working life. When needed, use a limescale remover intended for washing machines. Follow the instructions included with the remover. WARNING! Unplug the machine and close the tap before starting maintenance. CAUTION! Do not use alcohol, solvents or chemical products to clean the product.
Cleaning CAUTION! – Use a chlorine free detergent. – Do not use steel wool. • When needed, run the programme intended for cleaning the drum. See section "Drum clean", page 21 Clean the door seal and glass Do this after each wash. •...
Cleaning Turn off the tap and remove the water supply hose from the tap. 2. Clean the filter. 3. Refit the water supply hose to the tap and turn on the tap. Clean the machine inlet filter Clean the detergent dispenser every 3 months. The machine inlet filter must be cleaned if the water supply becomes restricted.
Troubleshooting TROUBLESHOOTING Troubleshooting WARNING! • Only authorised technicians may carry out repairs. • If you experience problems with the product, please see if the user instructions and troubleshooting information in the user manual can help you find a solution. If the problem persists: –...
Page 30
Troubleshooting Error messages Message Cause Remedy Water injection problem while washing Check if the water pressure is too low Straighten the water pipe Check if the inlet valve filter is blocked Water overflowing Restart the machine Water takes too long to drain Check if the drain hose is blocked The door does not close properly Check if any clothing is stuck...
Installation INSTALLATION Follow the instructions in this section to install your machine. WARNING! • If the power cord is damaged, it must be replaced by the manufacturer, the manufacturer’s service agent or similarly qualified persons in order to avoid a hazard. •...
Installation WARNING! • Make sure that the machine does not stand on the power cord. • The plug must be accessible after installation. WARNING! The machine must not be used in very wet rooms or rooms where there is a risk of explosive or caustic gases. CAUTION! •...
Installation 4. Let the water drain completely from the appliance. 5. Re-install the 4 transport bolts in the back of the appliance. WARNING! This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door cannot be used as a handle. Unpack the machine WARNING! Remove all packaging and transport bolts before using the machine.
Installation Loosen the bolts with a spanner and remove them. 2. Plug the holes with the transport hole plugs. 3. Keep the bolts in a safe place. NOTE! You will need the transport bolts again if you move the machine. Level the machine Loosen the nuts and screw in the feet fully.
Installation Connect the water supply hose to a tap Lift up the hose to the tap. 2. Screw the connector onto the threads of the tap. Connect the water supply hose to the machine Lift the supply hose to the inlet valve at the rear of the machine. 2.
Installation CAUTION! • Do not kink or stretch the drain hose. • Position the drain hose properly, as it could lead to a water leak if it is damaged. • Do not immerse the end of the drain hose into the waste water. Immersing the hose could hamper the drainage and cause waste water to go back into the machine again.
Appendix APPENDIX Technical specifications NOTE! The value of rated capacity refers to the weight of dry laundry. Model code See section "Find the model code", page 13 Width 595 mm Depth 565 mm Height 850 mm Weight 68 kg Rated capacity 8 kg Maximum spin speed 1400 rpm Power supply 220-240 V, 50 Hz...
Appendix Programme Washing load Programme Energy Water Max. Remaining at which the duration consumption consumption temperature moisture values were (hours:minutes) (kWh per cycle) (litres per cycle) reached for content and the achieved (rated min. 5 minutes spin speed capacity of the inside the (rpm) at which specific...
Page 40
Elvita products are distributed and marketed by Elon Group AB. Elon Group AB Bäcklundavägen 1 | 702 03 Örebro Sweden ELON GROUP | +46(0)10-220 40 00 | ELONGROUP.SE Support and service: ELVITA.SE...
Need help?
Do you have a question about the CTM7840AV and is the answer not in the manual?
Questions and answers