2
Notes on Safety
2.1
General Hazards for Non-observance of Notes on Safety
Care is exercised in accordance with recognised codes of engineering practice in the development
and production of Leuze lumiflex products. The protection function of the equipment can however
be impaired if the units are not used in accordance with their intended application or are not used
properly. Such instances can cause hazards for the health and life of the personnel operating the
machinery. Safety light curtains and light grids do not provide protection against injuries resulting
from flying objects.
2.2
Use according to Intended Applications
COMPACT equipment type
Light curtain, series C14
Light curtain, series C30
Light grid, series C50 and C90
Light grid, series C300/4, C400/3,
C500/2, C301/4, C401/3, C501/2
For use in the foodstuffs industry and in explosion-endangered areas, the COMPACT is not suitable
in its standard design. Special housings on request.
2.3
Operating Conditions
Applicable regulations (e. g. machinery-specific C-Standards in the EU or the OSHA and ANSI
standards in the USA) apply for the use and installation of COMPACT safety light curtains and light
grids. The appropriate authorities for the country in question are available for answering questions
regarding safety engineering. In general, compliance with the following operating is required:
• The COMPACT units shall be installed such that access from above, beneath or behind the pro-
tected field is ruled out. If this is not assured, then additional protection measures must be
installed
Leuze
lumiflex
Use according to intended
application
Finger protection
Hand protection
Horizontal guard over areas of
danger, detection of a person
Vertical guard against access to
areas of danger, detection of a person
COMPACT
51