Technical Data And Dimensions - Leuze lumiflex Compact C14 Series Connecting And Operating Instructions

8

Technical Data and Dimensions

Safety classification
Protected height
Protected width,
Range
Resolution (object
sensitivity)
Response time (from
interrupting the sens-
ing field to switching off
the OSSDs)
Switch on-delay time
(after the release of the
sensing field)
Enclosure rating
Ambient temperature
Supply voltage
Current consumption
Safety outputs (OSSD)
Contamination and
disturbance output
Interface for safety and
diagnosis
Test input transmitter
74
Category 4 according to EN 61496-1, -2 and/or
IEC 61496 -1,-2 (self-monitoring)
150...1800 mm for series C14 and C30
(1950, 2100, 2250 mm on request)
450...3000 mm for series C50
750...3000 mm for series C90
0.3...6 m for series C14
0.8...18 m for series C30, C50, C90, Cxx0
6.0...60 m for series Cxx1
14 mm, 30 mm, 50 mm, 90 mm, and/or whole person
with 2, 3, or 4 beams
Response time increases in proportion to number of
beams
Series C14: 7...39 ms (d-scan 10...78 ms)
Series C30: 7...20 ms (d-scan 10...39 ms)
Series C50: < 17 ms (d-scan 33 ms)
Series C90: < 13 ms (d-scan 20 ms)
exact Response time see Table 1, page 77
0.5 ms after the release of the sensing field. As an
reaction of an interruption of the sensing field, the
OSSDS remain switched off in minimum 100 ms,
even if the interruption is shorter.
IP 65
0 ... +55 ˚C
24 V DC +/- 20 %
External supply unit with safe disconnecting function
from the supply and 20 ms mains failure bridging
Transmitter: 75 mA
Receiver: 180 mA (without load)
2 fail-safe pnp-outputs with cross circuit
monitoring,
U = U - 2.7 V
amin vers
surge current (100 ms) = 0.4 A
permanent current at 35 °C = 0.3 A
permanent current at 55 °C = 0.22 A
max. capacity load per output = 0.3 µF
(0.1 µF for channel 2)
pnp output short circuit-proof, 70 mA max
RS-485, 57,6 KBaud max
closed circuit operation, minimum length of
opening equal to 50 ms
COMPACT Leuze lumiflex