Leuze lumiflex Compact C14 Series Connecting And Operating Instructions page 33

Electrical connection
Connection cable
Length of circuit
Type of operation
Synchronization
Transmitter/receiver
Suppression of infra-
red
interfering light
Measurements
Air humidity
Storage temperature
Leuze lumiflex
via PG 13.5 and/or PG 9, screw terminals and plug-
in connection device, alternatively via plug according
to DIN 43651 or Brad Harrison-Min
Transmitter: 7 pole, max 1.0 mm
Receiver: 7 pole, max 1.0 mm
(if necessary shielded)
2
max 100 m at 1,0 mm
protective operation without restart interlock
optical synchronization,
2 transmission channels can be selected
2 methods can be selected
Standard: high suppression
d-scan: very high suppression
response time increases according to measurement
table (exact response time see Table 1, page 77).
cross section 55 x 52 mm
length depending on protected height
234 ... 3084 mm
15 ... 95 %
-25 ... +70 ˚C
COMPACT
2
2
75