1.5
Deflection Mirrors
A hazard location or a danger area can be guarded on more than one front by employing deflection
mirrors. The maximum possible width of the protection zone is reduced for each mirror accordingly
as shown in the following table. The use of more than two mirrors is not to be recommended
because of the difficulties associated in the alignment.
COMPACT Series
C14
C30, C50, C90,
C300/4, C400/3, C500/2
C301/4, C401/3, C501/2
Fig. 3
Guarding several fronts of a hazard location by means of deflecting mirrors
50
Reduction in the Range per Mirror
1 m
2,3 m
10 m
a
=
receiver
b
=
deflecting mirror
c
=
transmitter
COMPACT
Leuze
lumiflex