Getting Started; Charging; Install The Tripod - FeiYu Tech SCORP PRO Instructions Manual

2. Getting started

2.1 Charging

Please fully charge the battery before power on the gimbal for the first time.
Charging with USB2.0 to Type-C cable, supports quick charge.
2
② Handle charging port
① Gimbal charging port
1
Handle charging only
Charge for gimbal and handle

2.2 Install the tripod

Install the 3/8 - 1/4 inch thread insert ① with the slot side down on the 1/4 inch screw
which is on the top of the tripod (The thread insert is factory mounted). Mount the
tripod ② to the bottom of the gimbal, then unfold the tripod and place the gimbal
on a flat surface.
1
2
- 3 -