Removing Optional Hdmi Module - Dell OptiPlex 7000 Tower Service Manual

2. Insert the optional VGA module into its slot from the inside of your computer.
3. Connect the VGA module cable to the connector on the system board .
4. Replace the two (M3X3) screws to secure the optional VGA module to the system.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in

Removing optional HDMI module

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the optional HDMI module and provide a visual representation of the removal
procedure.
Steps
1. Remove the two (M3X3) screws that secure the optional HDMI module to the computer chassis.
2. Disconnect the HDMI module cable from the connector on the system board.
3. Remove the HDMI module from the computer.
82 Removing and installing components
after working inside your
before working inside your
computer.
computer.