Installing The Communication Card - Dell OptiPlex 7000 Tower Service Manual

Steps
1. Lift the pull tab to open the PCIe door.
2. Disconnect the communication card cable from its connector on the system board.
3. Unroute the communication card cable from the routing guides.
4. Lift and remove the communication card from the system board.
5. Close the PCIe door.

Installing the communication card

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the communication card and provides a visual representation of the installation
procedure.
Removing and installing components 67