Next steps
1. Install the
slim Optical Disk
2. Install the
side
cover.
3. Follow the procedure in
Speaker
Removing the speaker
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the speaker and provide a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the connector on the system board.
2. Press the tab and slide the speaker along with the cable from the slot on the chassis.
Installing the speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
Drive.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
53