4. Close the PCIe door.
5. Align the triangles on the powered GPU cable holder with the triangles on the chassis.
6. Place the powered GPU cable holder on the computer chassis until it clicks to place.
7. Route the power cable through the retention tab on the cable holder.
8. Connect the two power cables, through the slot on the cable holder, to the connector on the powered GPU.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Slim optical-drive
Removing the Slim optical drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the slim ODD and provide a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
49