3.5 In. Hard-Drive Assembly; Removing The 3.5-Inch Hard Drive Assembly - Dell OptiPlex 7000 Tower Service Manual

Steps
1. Insert the hard drive assembly into the slot on the computer until it clicks into place.
2. Connect the hard drive data and power cables to the connectors on the 2.5-inch hard drive module.
Next steps
1. Install the 2.5-inch primary hard drive
2. Install the side cover.
3. Follow the procedure in

3.5 in. hard-drive assembly

Removing the 3.5-inch hard drive assembly

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
or 2.5-inch secondary hard
after working inside your
before working inside your
drive.
computer.
computer.
Removing and installing components 23