Extension Settings In Caracas Desk - Siemens Caracas Desk Rel. 2.0 Service Manual

Nur für den internen Gebrauch
The extension 40 (with the default extension number 70) in Hicom is to be grant-
ed the level of access that a guest telephone with trunk access should receive
(e.g. all lines unrestricted trunk access).

4.10.3 Extension settings in Caracas Desk

Load the current extension numbers to Caracas Desk from the HCMPP.TXT file
with Assistant for Caracas Desk (via the Configuration/Extension/Load Hicom file
menu).
ATTENTION: in the event of a modification performed while Caracas Desk is
live, all data and call charge data must first be removed from Caracas Desk (via
the Transfer/Read from Desk/Transfer customer data - yes, with call charge data
menu).
The data and call charge data must be reloaded into Caracas Desk after the
modification in Assistant for Caracas Desk (via the Transfer/Write to Desk/
Transfer customer data - yes, with call charge data menu).
Select the Configuration menu item once the data has been successfully loaded.
For user: enter CARACASDESK (in upper-case and without blanks)
For password: re-enter the password defined in Hicom Assistant E for the user
name CARACASDESK.
Set the extension types. Extensions 1 - 6 are preconfigured by default as admin-
istration. The preconfigured extensions are to be modified in accordance with re-
quirements. Four items of information are necessary for each extension:
Enter the required room number.
The Hicom number represents the physical connection PEN in Hicom.
Example: the U
signed the Hicom numbers as of 1, 2, 3, etc.
These numbers cannot be changed. However, they can be removed as re-
quired by deleting extensions and specified by adding extensions.
Enter the required extension number. This number must correspond to your
local network provider's extension number plan.
Type:
– Guest: Guest extensions
– Booth1/booth2: telephone booths. As in the case of "guests", individual
calls are itemized. On check-out, the name is not deleted and the status is
immediately set to "free". If a name is not specified at check-in, the original
name is retained. An individual charge factor and minimum charge can be
set for the telephone booth.
A31003-E1320-S100-4-7620
Service Manual
Basic Hicom settings for connection to 150 E Office Point Rel. 2.0 / 2.2
extensions (master) on the CBFC (central board) are as-
P0/E
Basic settings
4-21