Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fortis QiCYCLE 20
Summary of Contents for Fortis QiCYCLE 20
- Page 1 QiCYCLE 20" 36V SMART ELECTRIC BIKE FSQC20EBKGA...
-
Page 2: Table Of Contents
Safety & warnings Overview Components list Assembly Operation Cleaning & care Specifications Troubleshooting Notes... -
Page 3: Safety & Warnings
SAFETY & WARNINGS IMPORTANT: Read all safety precautions and instructions and save this user guide for future reference. Failure to follow any instructions in the user manual may result in electric shock, fire and/or serious injury. The rider must wear a helmet and appropriate safety gear when operating this bike. Ensure local laws and regulations for electric bike use are followed at all times. - Page 4 • The charger is designed for indoor use only. Do not place the battery in any liquid (acidic or alkaline). Keep the charger dry and never expose it to rain and high temperature environment. • Connecting reversely the polarity of battery is strictly prohibited. •...
- Page 5 and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Riding • Cycling involves risk of personal injury and damage of the bike, you should assume the responsibility for that risk.
- Page 6 If the front and rear wheel do not rotate smoothly due to friction, the bicycle's power consumption will increase and its mileage will reduce. To prevent failure, make sure the bicycle is lubricated and maintained in a timely manner. Use calcium-based or lithium-based grease as a lubricant.
- Page 7 • Always read the warning message on the handlebar: “Before each ride, make sure the handle post hinge is properly tightened and safely secured.” • Since it is not possible to predict every situation or condition that may occur during cycling, this user manual does not represent a safe use of the bike in all situations.
-
Page 8: Overview
OVERVIEW Saddle Kickstand Disc brake Seat post Chain Front fork Seat post clamp Pedals Front light Rear light Crank Head tube folding clasp Charging port Chain ring Head tube Rear mudguard Battery (inside) Shift lever Motor Tyre valve Brake levers Derailleur Wheel hub Display screen... - Page 9 Handlebar Front brake lever Display screen + / – button (N, 1, 2, 3 modes) Shift lever Left handlebar grip Right handlebar grip Red power button Rear brake lever Walk assist button...
- Page 10 Display Screen ‘N’ mode indicator (neutral, Battery level no power assistance) 1, 2, 3 mode indicators Abnormal temperature indication (power-assisted modes) Digital meter System error Charge percentage Bluetooth connection status Light Speed unit Charging Walk assist mode indicator...
-
Page 11: Components List
COMPONENTS LIST Pedals (x1 pair) Power adaptor (x1) 4, 5, 6mm Allen key (x1) Quick release lever (x1) M5 screw (x4) User guide (x1) ASSEMBLY Unfold the head tube • Remove the electric bike and all additional components from the box. Ensure all components (listed in the Overview and Components List) are present before disposing of any packaging. - Page 12 Install and secure the handlebar • Insert the handlebar into the head tube, adjusting the handlebar to ensure it is perpendicular (90° right angle) to the wheel. • Tighten the 4 screws at the top of the head tube. Install the front wheel Insert the front wheel between the front forks, ensuring the disc brake and calliper are positioned on the left, then lock the quick release latch to secure.
- Page 13 Adjust the saddle height Loosen the limit screw under the seat post. Open the quick release seat post clamp, insert the seat tube to the suitable position for the rider, then secure the quick release seat tube clamp. When adjusting the height of the saddle, the highest safety line (MIN) must not be higher than the upper edge of the seat tube clamp and the lowest safety line (MAX) must not be lower than the seat tube clamp.
- Page 14 Install the pedal The left pedal is marked with “L” on the outer The right pedal is marked with “R” on axis. Screw counter-clockwise to attach. the outer axis. Screw clockwise to attach. Attach the pedals to the crank by hand, screwing the left pedal counter-clockwise and the right pedal clockwise.
-
Page 15: Operation
OPERATION Charging Before using the electric bike for the first time, use the provided power adapter to charge the electric bike and activate the battery. If the battery power is too low, the battery will sleep. Ensure it is sufficiently charged, then turn it on again. - Page 16 Power on Press and hold the red power button Press and hold the red power button on the left side of the handlebar to turn on the power. If there is no operation within 10 minutes, it will automatically shut down Power off Press and hold the red power button...
- Page 17 Bluetooth connection Scan the QR code to download QiCYCLE app. If you cannot scan the QR code, search “QiCYCLE” on the Play Store (Android) or App Store (iOS), and download. Once downloaded, open the app on your device, locate the model “C2” and tap Connect.
- Page 18 Walk assist While powered on, press and hold the walk assist button to start the boosting function. In this mode, the speed will not exceed 6km/h. Release the walk assist button to stop. The walk assist feature is recommended when carrying heavy loads or travelling uphill. It may be too fast for general walking speeds on flat ground or with low weight.
- Page 19 Battery assembly drawing Place the battery into the frame tube Secure the battery with the screws Frame number location Frame number The frame number is located at the head tube above the lights.
-
Page 20: Cleaning & Care
CLEANING & CARE • It is recommended to use warm water and a sponge to clean the bicycle. When using special cleaning products, pay close attention to the directions of the cleaning product. Do not use acid, lubricating oil, high-temperature grease, brake cleaner or other harsh cleaning products to clean the bicycle. - Page 21 • When the motor is not running, try to clean the dust and grease on the surface. Keep the motor clean and prevent oil and water from entering in it. Do not spray water directly on the motor. • Check the completeness of the motor leading-out. If the motor overheats, emits an odour, smokes, makes strange sounds or has any fault, stop using immediately and contact the dealer.
-
Page 22: Specifications
SPECIFICATIONS Main technical parameters of finished bicycle Size: 1530 x 600 x 1060mm Weight: Approx. 20 kg Centre distance between 1020mm front and rear wheels: Cut off speed: 25km/h Deadweight: 120kg Front fork: Aluminium alloy integrated semi-solid extrusion Aluminium Φ33.9×600mm seat tube Seat tube: Wheel size: 20in... - Page 23 Main technical parameters of battery Battery type: Lithium battery Nominal voltage: Battery capacity: 7.5Ah Charging time: About 5.5 hours Nominal charging voltage: Main technical parameters of motor Motor type: Permanent magnet Nominal power: 250W Rated voltage:...
-
Page 24: Troubleshooting
TROUBLESHOOTING Failure Solution Bike isn’t charging Use the original charger. The battery level is too low; ensure the battery is Bike isn’t powering on charged to full capacity before turning on. Adjust the gear to 1, 2 or 3. N gear has no power assist. No power assist The power assist is unavailable when the power level is lower than 10%. - Page 25 Push the chain press to keep the chain slack. After the Chain falls off chain is hung, loosen the chain, then press and tighten the chain to repair it. The low temperature below -5°C will greatly affect the Distance per charge battery capacity.
-
Page 26: Notes
NOTES... - Page 28 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the QiCYCLE 20 and is the answer not in the manual?
Questions and answers