Table of Contents
Advertisement
AXIS Q9216-SLV Network Camera
Configure your device
Note
• WDR can cause artifacts in the image.
• WDR may not be available for all capture modes.
1. Go to Image > Wide dynamic range.
2. Turn on WDR.
3. Use the Local contrast slider to adjust the amount of WDR.
4. If you still have problems, go to Exposure and adjust the Exposure zone to cover the area of interest.
Find out more about WDR and how to use it at axis.com/web-articles/wdr.
Verify the pixel resolution
To verify that a defined part of the image contains enough pixels to, for example, recognize the face of a person, you can use the
pixel counter.
1. Go to Video > Image and click
2. Click
3. In the camera's live view, adjust the size and position of the rectangle around the area of interest, for example where
you expect faces to appear.
.
for Pixel counter.
Image with WDR.
9
Advertisement
Table of Contents
