Table of Contents
Advertisement
AXIS Q9216-SLV Network Camera
The device interface
-
-
-
-
-
• Main view
-
-
-
Power settings
Power settings
Delayed shutdown: Turn on if you want to set a delay time before the power is turned off.
Delay time: Set a delay time between 1 and 60 minutes.
Accessories
I/O ports
Use digital input to connect external devices that can toggle between an open and closed circuit, for example PIR sensors, door or
window contacts, and glass break detectors.
Use digital output to connect external devices such as relays and LEDs. You can activate connected devices through the VAPIX®
Application Programming Interface or in the device interface.
Port
Name: Edit the text to rename the port.
Direction:
indicates that the port is an input port.
you can click the icons to change between input and output.
Normal position: Click
Active position: Shows the current state of the port. The input or output is activated when the active position is different from
the normal position. An input on the device has an open circuit when it's disconnected or when there is a voltage above 1V DC.
Note
During restart the output circuit is open. When the restart is complete, the circuit goes back to the normal position. If you
change any settings on this page, the output circuits go back to their normal positions regardless of any active triggers.
Supervised: Turn on to make it possible to detect and trigger actions if someone tampers with the connection to digital I/O devices.
In addition to detecting if an input is open or closed, you can also detect if someone has tampered with it (that is, cut or shorted).
To supervise the connection requires additional hardware (end-of-line resistors) in the external I/O loop.
Logs
Reports and logs
: Drag the slider to set the thickness for the top border.
: Drag the slider to set the thickness for the right border.
: Drag the slider to set the thickness for the bottom border.
: Drag the slider to set the thickness for the left border.
Border color: Select a border color.
Source: Select the camera that will stream on the full display.
Rotate image 180°: Click to rotate the image.
Mirror image: Click to flip the image.
if the normal position should be open circuit, and
indicates that it's an output port. If the port is configurable,
if it should be closed circuit.
45
Advertisement
Table of Contents
