Table of Contents
Advertisement
AXIS Q9216-SLV Network Camera
Configure your device
7. In the list of conditions, under Scheduled and recurring, select Scheduled event.
8. In the list of schedules, select After hours .
9. In the list of actions, under Recordings, select Record video while the rule is active.
10. Select where to save the recordings.
11. Select a Camera.
12. Set the prebuffer time to 5 seconds.
13. Set the postbuffer time to 60 seconds.
14. Click Save.
Trigger an alarm if someone opens the housing
This example explains how to trigger an alarm if someone opens the housing.
Add a recipient:
1. Go to System > Events > Recipients and click Add recipient.
2. Type a name for the recipient.
3. Select Email.
4. Type an email address to send the email to.
5. The camera doesn't have it's own email server, so it will need to log into another email server to be able to send mails. Fill
in the rest of the information according to your email provider.
6. To send a test email, click Test.
7. Click Save.
Create a rule:
8. Go to System > Events > Rules and add a rule.
9. Type a name for the rule.
10. In the list of conditions, select Casing open.
11. In the list of actions, select Send notification to email.
12. Select a recipient from the list.
13. Type a subject and a message for the email.
14. Click Save.
Provide visual indication of an ongoing event
You have the option to connect the AXIS I/O Indication LED to your network camera. This LED can be configured to turn on whenever
certain events occur in the camera. For example, to let people know that video recording is in progress.
Required hardware
•
AXIS I/O Indication LED
•
An Axis network video camera
14
Advertisement
Table of Contents
