Set Up Rules For Events - Axis Q9216-SLV User Manual

AXIS Q9216-SLV Network Camera
Configure your device
1. Connect an external monitor using the HDMI connector.
2. Go to System > Video out and turn on HDMI.
3. Select a Source. Rotate the image if needed.
Set up network storage
To store recordings on the network, you need to set up your network storage.
1. Go to System > Storage.
2. Click +Add network storage under Network storage.
3. Type the IP address of the host server.
4. Type the name of the shared location on the host server under Network Share.
5. Type the username and password.
6. Select the SMB version or leave it on Auto.
7. Check Add share even if connection fails if you are experiencing temporary connection issues, or the share is not
yet configured.
8. Click Add.
Record and watch video
Record video directly from the camera
1. Go to Video > Image.
2. To start a recording, click
If you haven't set up any storage, click Set up. You can use an SD card or network storage.
- See Set up network storage on page 12.
3. To stop recording, click
Watch video
1. Go to Recordings.
2. Click

Set up rules for events

You can create rules to make your device perform an action when certain events occur. A rule consists of conditions and actions.
The conditions can be used to trigger the actions. For example, the device can start a recording or send an email when it detects
motion, or show an overlay text while the device is recording.
To learn more, check out our guide Get started with rules for events.
Trigger an action
1. Go to System > Events and add a rule. The rule defines when the device will perform certain actions. You can set
up rules as scheduled, recurring, or manually triggered.
.
again.
for your recording in the list.
12