Table of Contents
Advertisement
AXIS Q9216-SLV Network Camera
Specifications
Note
• The tally LED (indication LED) only indicates network transmission. If video or audio is only transmitted through HDMI
or SDI the tally LED will be unlit.
Tally LED
Unlit
Red
SD card slot
NOTICE
TICE
NO
NO
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See Reset to factory default settings on page 52.
Connectors
HDMI connector
TM
Use the HDMI
connector to connect a display or public view monitor.
Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
Audio connector
•
Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
•
Audio in – 3.5 mm input for a digital microphone, an analog mono microphone, or a line-in mono signal (left channel is
used from a stereo signal).
•
Audio out – 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active speaker
with balanced input and a built-in amplifier. A balanced connector must be used for audio out.
Indication
Camera idle.
Active network transmission or recording.
57
Advertisement
Table of Contents
