Signals And Possible Faults On The Tydom Home - DELTA DORE Pack TYBOX 5000 Installation Instructions Manual

6/ Troubleshooting
6.2 Signals and possible faults on the TYDOM Home
LED
System accessible locally and remotely, user connected
Flashing white
System accessible locally and remotely
Steady white
System accessible locally, user connected
Flashing orange
System accessible locally
Steady Orange
No IP address allocated
Steady Red
Advanced functions
Below are the functions accessible depending on how long the button on the back of
your Tydom Home is pressed..
>
>
3''
15''
A B
Static IP -> DHCP
Advanced functions
A
Secure connection and viewing connection status
Briefly press the button. LED displays for 10 seconds.
Static IP mode
Flashing yellow
DHCP mode
Flashing blue
DHCP in progress Check the DHCP activation on the router
Flashing blue (3x)
No network connection Check the Ethernet link
Flashing red
B
Change from static IP to DHCP
Press the button for 3 seconds until the pink LED flashes
slowly. Release.
14
System status
>
30''
C
RESET
C
Reset to factory settings
Press the button for 30 seconds until the LED stops flashing. Release.
- DHCP mode
System status
- Clear product associations
EN
15