Table of Contents
Advertisement
Programming Levels
Sound sensitivity
Manual Mode
Strobe rate
Master dimmer
IR setting
Configuration
Refer to the instructions below on how to access the different function available for the Cast Tube:
Static Color Mode
To run the Cast Tube on a static color, follow the instructions below.
1. Press <MODE> repeatedly until Static shows on the display.
2. Press <ENTER>.
3. Use <+> or <–> to choose between Fixed Color (to select an individual RGBW color or any preset
RGBW color combinations) and Color Temperature (to select a preset color temperature).
4. Press <ENTER>.
5. Press <MODE> to go back to the main menu.
Automatic Program
To run a program on the Cast Tube, follow the instructions below.
1. Press <MODE> repeatedly until Auto Show shows on the display.
2. Press <ENTER>.
3. Use <+> or <–> to select from automatic programs: Auto 1 (4-color fade), Auto 2 (4-color pulse),
Auto 3 (15-color fade), or Auto 4 (15-color pulse).
4. Press <ENTER>.
5. Press <MODE> to go back to the main menu.
Auto Program Speed
To adjust the auto program speed on the Cast Tube, do the following:
1. Press <MODE> repeatedly until Program Speed shows on the display.
2. Use <+> or <–> to increase or decrease the program speed, from 001–100.
3. Press <ENTER>.
4. Press <MODE> to go back to the main menu.
Sound Mode
To set the Cast Tube to work on sound mode, do the following:
1. Press <MODE> repeatedly until Sound Mode shows on the display.
2. Press <ENTER>.
3. Use <+> or <–> to select from sound programs: Sound 1 (4-color fade), Sound 2 (4-color pulse),
Sound 3 (15-color fade), or Sound 4 (15-color pulse).
4. Press <ENTER>.
5. Press <MODE> to go back to the main menu.
Sound Sensitivity
To adjust the sound sensitivity of the Cast Tube, follow the instructions below:
1. Press <MODE> repeatedly until Sound Sensitivity shows on the display.
2. Use <+> or <–> to increase or decrease the sound sensitivity, from 001–100.
3. Press <ENTER>.
4. Press <MODE> to go back to the main menu.
Page 6 of 12
001–100
Red
Green
000–255
Blue
White
000–100
000–255
On
Off
Description
Sound sensitivity for sound programs 1–4
Manually adjust each color values to create a specific
color
Adjusts strobe rate, slow to fast
Adjusts the brightness of static and automatic programs
Turns infrared function on (to use with the IRC remote)
Turns infrared function off
Cast Tube User Manual Rev. 1
Operation
Advertisement
Table of Contents
