Running A Power Cleaning Using The Product Control Panel - Epson SureColor P8570D Series User Manual

Running a Power Cleaning Using the Product Control Panel

If print head nozzles are still clogged after cleaning the print head several times, run the Power
Cleaning utility from the product control panel. This process consumes a lot of ink to clean the clogged
nozzles.
1. Load roll or cut sheet paper in the printer.
2. Make sure the correct paper type is selected.
3. Select
4. Select the nozzle pairs you want to clean or select All Colors and select OK to begin the power
cleaning cycle.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
Note: Depending on nozzle status and the number of pairs selected, the power cleaning cycle can
take up to 27 minutes.
5. Select Yes to print a nozzle check pattern.
The nozzle pattern prints.
6. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
If nozzles are still clogged, turn off the printer and leave it off overnight. If nozzles are still clogged,
contact Epson for support.
> Maintenance > Power Cleaning.
287