Table of Contents
Advertisement
4.3
Settings
Actuate the button
enabled to perform various settings and call up information regarding the SONO-VIEW.
The setup menu features the following structure:
Setting
Description
New Installation
Enables a new detection of connected probes
Language
Setting of the language
Unit (Temp.)
Switch between °C and °F
LCD Contrast
Setting of the display contrast
Info
Serial number and further information regarding your SONO-VIEW
USB/IMP-Bridge
Enables the comfortable configuration of your probes via PC
Set the desired setting using the buttons
selected setting. Actuate the button
4.3.1 New Installation
See Section 4.1 „Initial and New Installation"
4.3.2 Language
The selection of the language is performed with the buttons
language is set as the standard language.
To exit the menu item "Language", actuate the button
4.3.3 Unit (Temp.)
Use the
/
buttons to select the temperature unit.
10
while the measurement display is active and you will reach the setup menu. Here, you are
/
again in order to exit the setup menu.
. By actuating the button
/
. By actuating the button
.
you can subsequently enter the
the selected
Advertisement
Table of Contents
Need help?
Do you have a question about the SONO-VIEW and is the answer not in the manual?