Table of Contents
Advertisement
Chapter 2
Accessories
To complement the functionality of your standard rack, a wide assortment of accessories is available.
These accessories are shown below. These accessories allow you to complete your system with only the
items you require while providing you a certified and tested solution.
Cable guide
Tie-together kit
E7723B
J1512A
J1513A
Filler panel
Lifting hooks
J1514A
J1521A
PDUs
The HP Power Distribution Units (PDUs) are designed to provide flexibility for your power
requirements. To provide power to the rack, a PDU must be ordered as an accessory. There are
different types of PDUs available for different voltages. All input leads from the mains, except
safety ground, are interrupted in the event of a short circuit.
The PDUs can be mounted both vertically and horizontally on the rear rack columns, depending
on your rack configuration. If you purchased the bundle containing both the 10 and 16-amp
products, you can connect them to each other with the provided cord. Use the EIA holes for
horizontal mounting, and the accessory holes for vertical mounting.
Each rack can be equipped with up to four PDUs. Each PDU must be purchased as an accessory.
Figure 2-3 shows some PDU Mounting schemes.
Side panel
PDU
J1506A
E7670A
J1507A
E7671A
J1508A
E7672A
E7674A
E7675A
E7676A
Keyboard tray
Monitor tray
J1518A
J1519A
Description
Front door
J1509A
J1510A
J1511A
Universal shelf
J1520A
7
Advertisement
Table of Contents
