Table of Contents
Advertisement
Chapter 2
Keyboard Tray
A pullout keyboard tray is available. The keyboard tray can be installed with either a sitting, or
standing, operator in mind. The tray is mounted on rollers that allow it to be retracted or
extended.
Monitor Mount Kit
An optional universal monitor mounting kit is available. A shelf that can be mounted for a
sitting, or standing operator. The shelf has channels cut from it that accommodate the securing
clamps.
Universal Mounting Rails
Some equipment is supported by and anchored to universal rails made of cold rolled steel that
weigh 2.7 kg (6 lbs) and support up to 68.2 kg (150 lbs). Hollow metal blocks have lips that fit
into the support rails and holes for screws. The blocks are slid into contact with the equipment,
and are then attached to the rail with screws.
Spacers are fit between the rails and the columns.
Ballast
Ballast is available in 30 lb. kits, and may be required when using slide-mounted products and/or
keyboard/ work surface products. Use the stability work sheets to determine ballast
requirements.
CAUTION
Do not ship racks with ballast installed.
CAUTION
Always mount ballast in the rear of the rack.
NOTE
The anti-tip assembly is not a substitute for ballast.
10
Description
Advertisement
Table of Contents
