The Mto Command - Advanced Electronic Applications PK-88 Operating Manual

PK-88 OPERATING MANUAL
If MFROM is set to YES WX1AAA-1 or NO WX1AAA-1, then only WX1AAA-1 will match and
be processed.
When MFROM and MTO contain different types of arguments, to avoid any possible con-
flict, the arguments take the following priority:
ALL, NO-list, YES-list, NONE
Clear the MFROM field by typing %, &, or
4.9.2

The MTO Command

MTO functions like MFROM and uses identical arguments to determine how the PK-88
monitors the Packet channels and displays information; the stations whose packets will be
displayed or hidden. MTO is set to NONE when you start the PK-88 for the first time.
o To display the ALL|NONE/YES list|NO list status of call signs of stations to whom
packets will or will not be displayed, type MTO.
You can use the abbreviated command form or mnemonic:
o To stop display of all packets type
same effect as setting MONITOR to 0 (zero).
o To display packets only to one or more specific stations, type MTO YES (followed by
a list of calls signs). Only packets from stations whose call signs are listed after YES
will be displayed. MFROM should be NONE.
o To hide or mask packets only to one or more specific stations, type 'MTO NO' (fol-
lowed by a list of call signs). Only packets to stations whose call signs are listed
after NO will not be displayed.
You can add optional SSIDs specified as
WX2BBB or YES WX2BBB, any combination of WX2BBB, WX2BBB-1, WX2BBB-15 will be
matched and processed. If MTO is set to YES WX2BBB-1 or NO WX2BBB-1, then only
WX2BBB-1 will match and be processed.
When MFROM and MTO contain different types of arguments, to avoid any possible con-
flict, the arguments take the following priority:
ALL, NO list, YES list, NONE.
Clear MTO with %, &, or
mto
cmd:
MTO all
mt
cmd:
MTO yes WX1AAA WX2BBB WX3CCC WX4DDD
OFF as the argument.
OFF as the argument.
MFROM NONE and
-n
after the call sign. If MTO is set to NO
4 - 14
PACKET OPERATION
MTO NONE. This has the
PK-88 - 61