Mstamp; Mto - Advanced Electronic Applications PK-88 Operating Manual

PK-88 OPERATING MANUAL
MSTAMP ON|OFF
Parameters: ON
OFF
The MSTAMP command activates or disables time stamping of monitored packets. When the PK-
88's internal software clock is set, date and time information is available for automatic logging of
packet activity or other applications. When MSTAMP is OFF, the packet header display looks like
this:
WX1AAA*>WX2BBB>WX3CCC <I;2,2>:
When MSTAMP is ON and DAYSTAMP is OFF, the display looks like this:
22:51:33 WX1AAA*>WX2BBB>WX3CCC <I;1,7>:
When both MSTAMP and DAYSTAMP are ON, the display looks like this:
10-Jul-86 22:54:25 WX1AAA*>WX2BBB>WX3CCC <I;2,2>:
Set the date and time with the DAYTIME command. Setting MSTAMP ON increases the length of
the address display. Set HEADERLN ON to display this information on a separate line.
MTO all,none,yes/no call1[,call2..] Mnemonic: MT
Parameters: call
MTO uses arguments to determine how the PK-88 monitors packet channels and displays informa-
tion – which stations' packets will be displayed and which stations' packets will be masked or hid-
den. MTO is set to 'none' when you start the PK-88 for the first time.
Type MTO to display the ALL/NONE/YES list/NO list status of call signs of stations to which ad-
dressed packets will or will not be displayed. You can use the abbreviated command form or mne-
monic:

mto

cmd:
MTO all
To stop packets addressed to all stations from being displayed, type
To display only packets addressed TO one or more specific stations, type
list of calls signs). Packets will be displayed only if addressed to stations whose call signs are listed
after YES.
To hide or mask packets addressed to one or more specific stations, type
list of call signs). Packets addressed to stations whose call signs are listed after NO will not be dis-
played.
You can include optional SSIDs or extensions specified as -
WX1AAA or 'yes WX1AAA,' any combination WX1AAA,' WX1AAA-1 .... WX1AAA-15 will be matched
and processed. If MTO is set to 'yes WX1AAA-1' or 'no WX1AAA-1,' then only WX1AAA-1 will match
and be processed.
Mnemonic: MS
Monitored frames are time stamped.
Monitored frames are not time stamped.
all, none, YES_list, NO_list.
list of up to eight call signs, separated by commas.
mt
cmd:
MTO yes WX1AAA,WX2BBB,WX3CCC,WX4DDD
Default: OFF
Default: none
n
after the call sign. If MTO is set to 'no
5 - 50
COMMAND SUMMARY
MTO ALL.
MTO (YES followed by a
MTO (NO followed by a
PK-88 - 125