Display Timing Parameters; 2.10 Immediate Commands; Unlisted Commands - Advanced Electronic Applications PK-88 Operating Manual

PK-88 OPERATING MANUAL
2.9.8

Display Timing Parameters

disp t
cmd:
AXDELAY
AXHANG
CHECK
CLKADJ
CMDTIME
CPACTIME
DWAIT 16
FRACK 3
PACTIME
PERSIST
PPERSIST
RESPTIME
SLOTTIME
TXDELAY

2.10 Immediate Commands

The 'immediate' commands do not have default values. These commands take effect as
soon as you type them (and a [RETURN]), to start, stop or activate a specific PK-88 func-
tion.
Like all other PK-88 commands, the immediate commands can be typed with a short mne-
monic or abbreviated form. See the command descriptions in Chapter 7, 'Command Sum-
mary'.
CALIBRAT
CONNECT
CONVERSE
CSTATUS
DAYTIME
DISCONNE
DISPLAY
HELP
ID
K
MDCHECK
MHEARD
RESET
RESTART
TCLEAR
TRANS
2.10.1

Unlisted Commands

The following commands do not appear in the displayed command list:
ADDRESS - CALIBRAT - CONOK - CR - HELP - HOST - HPOLL - IO - KISS - MDCHECK -
MEMORY - RAWHDLC
These commands are explained in the Command Summary in Chapter 7.
0 (00 msec.)
0 (000 msec.)
30 (300 msec.)
0
10 (1000 msec.)
OFF
(160 msec.)
(3 sec.)
AFTER 10 (1000 msec)
63
ON
5 (500 msec.)
10 (100 msec.)
30 (300 msec.)
Start calibration routine
Send connect request to <Call>
Start Converse Mode from Command
Show status of channels (links)
Show or enter time of day
Send DISC to distant station
Show PK-88 parameters/classes
Show a brief list of commands
Force ID packet via Unproto path
Same as CONVERSE
Activate MailDrop from terminal side (SysOp)
Display call signs heard
RESET bbRAM to factory defaults
Same as power-on/off reset
Clear the Transmit Buffer
Start Transparent Data Mode
2 - 15
Repeater key-up delay (×10 ms.)
Repeater hang time (× 10 ms.)
Idle link timeout (×10 seconds)
Correction for real-time clock
Transparent Mode escape timer
Use packet timeout in Converse
Delay for digi repeat (×10 ms.)
Time (×1 seconds.) to wait for ACK
Packet transmit timer (×100 ms.)
P-persistent CSMA threshold
P-persistent CSMA instead of DWAIT
Minimum delay before sending ACK
P-persistent slot time (×10 ms.)
PTT key-to-data delay (×10 ms.)
INSTALLATION
PK-88 - 31