Headerln; Help; Hid - Advanced Electronic Applications PK-88 Operating Manual

PK-88 OPERATING MANUAL
HEADERLN ON|OFF
Parameters: ON
OFF
HEADERLN affects the display of monitored packets. When HEADERLN is OFF, the address informa-
tion is shown on the same line as the packet text:
WX1AAA>WX2BBB: Go ahead and transfer the file.
When HEADERLN is ON, the address is shown, followed by a <CR><LF> that puts the packet text
on a separate line:
WX1AAA>WX2BBB:
Go ahead and transfer the file.
If MRPT or MSTAMP are ON, set
page when these functions are active.

HELP

While in Command Mode, type the command
Your monitor displays the following brief list:
help
cmd:
HELP:
CONNECT
CONVERSE
DISPLAY
MHEARD
RESTART
TCLEAR
cmd:
You can exit from your present operating mode and enter Command Mode at any time to list the
HELP text.
HID ON|OFF
Parameters: ON
OFF
The HID command activates or disables the PK-88's automatic periodic transmission of identifica-
tion packets when operating as a digipeater. This identification consists of an unsequenced I-frame
with your station identification (MYCALL) and MYALIAS in the data field.
Mnemonic: HEA
The header for a monitored packet is printed on a separate line from the
packet text.
The header and the text of monitored packets are printed on the same line.

HEADERLN

Mnemonic: H
DISCONNE
TRANS
CALIBRAT
CSTATUS
RESET
Mnemonic: HI
The PK-88 sends HDLC identification as a digipeater.
The PK-88 does not send HDLC identification.
Default: OFF
ON; long headers may extend across your screen or
Immediate Command
H to read the abbreviated on-line HELP file.
Default: OFF
5 - 36
COMMAND SUMMARY
PK-88 - 111