Unproto; Users - Advanced Electronic Applications PK-88 Operating Manual

Hide thumbs Also See for PK-88:
Table of Contents

Advertisement

PK-88 OPERATING MANUAL
When TXFLOW and XFLOW are ON, the PK-88 uses the Start and Stop characters (set by XON and
XOFF) to control the input from the terminal.
Unless TRFLOW is also ON, only hardware flow control is available to the computer or terminal to
control output from the PK-88.
If the PK-88 Start and Stop characters are set to $00, hardware flow control will always be se-
lected regardless of the setting of TXFLOW.
UNPROTO call1 [VIA call2[,call3 .... call9]]
Parameters:
call1
call2-9 Optional digipeater call list, up to eight calls.
UNPROTO sets the digipeat and destination address fields of packets sent in the unconnected (un-
protocol) mode.
Unconnected packets are sent as unsequenced I-frames with the destination and digipeat fields
taken from 'call1' through 'call9' options. When a destination is not specified, unconnected packets
are sent to 'CQ.'
Unconnected packets sent from other packet stations can be monitored by setting MONITOR to a
value greater than '1' and setting MFROM to ALL.
The digipeater list can also be used for beacon packets.
To send a beacon message through one or more digipeaters, type the following:
UNPROTO BEACON VIA WX1AAA,WX2BBB,WX3CCC
cmd:
Your beacon is routed to and repeated by each of the digipeaters in the order listed.
n

USERS

Parameters:
n
USERS only affects the way that incoming connect requests are handled. It does not affect the
number of connections you initiate with the PK-88, For example:
USERS 0
allows incoming connections on any free logical channel
USERS 1
allows incoming connections on logical channel 0 only
USERS 2
allows incoming connections on logical channels 0 and 1
USERS 3
allows incoming connections on logical channels 0, 1 and 2,
and so on, through USERS 10.
Call sign to be placed in the TO address field.
Mnemonic: US
0 to 10 specifies the number of active simultaneous connections that can be
established with the PK-88.
Mnemonic: U
Default: 1
5 - 65
COMMAND SUMMARY
Default: CQ
PK-88 - 140

Advertisement

Table of Contents
loading

Table of Contents