Xon - Advanced Electronic Applications PK-88 Operating Manual

PK-88 OPERATING MANUAL COMMAND SUMMARY
n

XON

Mnemonic: XON Default: $11 [^Q]
n
Parameters: 0 to $7F (0 to 127 decimal) specifies an ASCII character code.
XON selects the PK-88 Start character that is sent to the computer or terminal to restart input from
that device.
You can enter the code in either hex or decimal.
The Start character default value is [^Q] for computer data transfers.
If you're operating in Converse Mode, and there is a chance that activity might fill the PK-88's buf-
fers, you can define the Stop character as [^G] ($07), which 'beeps' many terminals.
5 - 67 PK-88 - 142