Upgrade The Firmware And Reboot The Office Ringer - CyberData 011149 Series Operation Manual

2.4 Upgrade the Firmware and Reboot the Office Ringer

Note
Note
To upload the firmware from your computer:
1. Retrieve the latest Office Ringer firmware file from the VoIP Indoor Office Ringer Downloads
page at:
http://www.cyberdata.net/products/voip/digitalanalog/officeringer/downloads.html
2. Unzip the firmware version file. This file may contain the following:
• Firmware file
• Release notes
3. Log in to the Office Ringer home page as instructed in
Home
Operations Guide
To guard against failed firmware upgrades, units shipped from CyberData with firmware
version 5.1.2 and later feature a built-in "fail safe" mechanism. Note that field upgrading
earlier units with v5.x.x will not allow for this feature.
Any units that have shipped with firmware version 6.0.0 or later will not be able to run
firmware that is version 5.1.2 or earlier.
Page".
930386E
Installing the VoIP Indoor Office Ringer
Section 2.3.2, "Log in to the Configuration
CyberData Corporation
54
Parts List