CyberData 011149 Series Operation Manual page 49

2. On the Audio Configuration page, enter values for the parameters indicated in
Audio Files
0-9
Dot
Audiotest
Pagetone
Your IP Address is
Rebooting
Restoring default
Ringback Tone
Ring Tone
Intrusion Sensor Triggered
Sensor Triggered
Night Ring
Operations Guide
Table 2-15. Audio Configuration Parameters
Web Page Item
The name of the audio configuration option is the same as the spoken
audio that plays on the board (24 character limit).
'0' corresponds to the spoken word "zero."
'1' corresponds to the spoken word "one."
'2' corresponds to the spoken word "two."
'3' corresponds to the spoken word "three."
'4' corresponds to the spoken word "four."
'5' corresponds to the spoken word "five."
'6' corresponds to the spoken word "six."
'7' corresponds to the spoken word "seven."
'8' corresponds to the spoken word "eight."
'9' corresponds to the spoken word "nine."
Corresponds to the spoken word "dot." (24 character limit)
Corresponds to the message "This is the CyberData IP speaker test
message..." (24 character limit)
Corresponds to a simple tone that is unused by default (24 character limit).
Corresponds to the message "Your IP address is..." (24 character limit).
Corresponds to the spoken word "Rebooting" (24 character limit).
Corresponds to the message "Restoring default" (24 character limit).
This is the ringback tone that plays when calling a remote extension
(24 character limit).
This is the tone that plays when set to ring when receiving a call (24
character limit).
Corresponds to the message "Intrusion Sensor Triggered"
(24 character limit).
Corresponds to the message "Sensor Triggered" (24 character limit).
Specifies the ringtone for officering. By default this parameter uses the
same audio file that is selected for the Ring Tone parameter.
The Browse button will allow you to navigate to and select an audio file.
The Play button will play that audio file.
The Delete button will delete any user uploaded audio and restore the
stock audio file.
The Save button will download a new user audio file to the board once
you've selected the file by using the Browse button. The Save button will
delete any pre-existing user-uploaded audio files.
930386E
Installing the VoIP Indoor Office Ringer
Description
CyberData Corporation
41
Parts List
Table 2-15.