CyberData 011149 Series Operation Manual page 32

2. On the Network Configuration page, enter values for the parameters indicated in
IP Addressing
Network Settings
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
Current Network
Settings
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the Office Ringer if appropriate.
4. Connect the Office Ringer to the target network.
5. From a system on the same network as the Office Ringer, open a browser with the new IP
address of the Office Ringer.
Operations Guide
Table 2-8. Network Configuration Parameters
Web Page Item
Select either DHCP IP Addressing or Static IP
Addressing by marking the appropriate radio button. If you select
Static, configure the remaining parameters indicated in
you select DHCP, go to
Enter the Static IP address.
Enter the Subnet Mask address.
Enter the Default Gateway address.
Enter the DNS Server 1 address.
Enter the DNS Server 2 address.
Shows the current network settings.
Shows the current Static IP address.
Shows the current Subnet Mask address.
Shows the current Default Gateway address.
Shows the current DNS Server 1 address.
Shows the current DNS Server 2 address.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
930386E
Installing the VoIP Indoor Office Ringer
Description
Step 3.
CyberData Corporation
24
Parts List
Table 2-8.
Table 2-8
. If