Configure The Office Ringer Parameters - CyberData 011149 Series Operation Manual

2.3 Configure the Office Ringer Parameters

To configure the Office Ringer online, use a standard web browser.
Configure each Office Ringer and verify its operation before you mount it. When you are ready to
mount an Office Ringer, refer to
All Office Ringers are initially configured with the following default IP settings:
When configuring more than one Office Ringer, attach the Office Ringers to the network and
configure one at a time to avoid IP address conflicts.
IP Addressing
IP Address
Web Access Username
Web Access Password
Subnet Mask
Default Gateway
a. Default if there is not a DHCP server present.
Operations Guide
Section A.1, "Mount the Office Ringer"
Table 2-4. Factory Default Settings
Parameter
a
a
a
930386E
Installing the VoIP Indoor Office Ringer
for instructions.
Factory Default Setting
DHCP
10.10.10.10
admin
admin
255.0.0.0
10.0.0.1
CyberData Corporation
16
Parts List