Table of Contents
Advertisement
4.8
Data recording
1.
The hygrometer has a memory for 32000 data records.
2.
Before using the data logging function, you must set up the parameters via the Smart
Logger PC software. For detailed operation, please refer to the help file of the Smart
Logger software.
3.
When the logging start mode is set to "by key", pressing the REC key on the meter will
start the data logging function. The "REC" icon will now appear on the LCD.
4.
When the data recordings reach the pre-set quantity, the "FULL" icon will appear on
the LCD and the meter will automatically turn off.
5.
In data logging mode, when the power key is pressed to turn off, the "REC" icon will
flash. Release the power key immediately to cancel power off or press and hold the
power key for 3 seconds to turn the meter off and data logging will stop.
4.9
Charge battery
When the battery level is insufficient, the battery icon will flash on the LCD screen.
Use the DC 5V mains adaptor to connect to the micro USB charging port at the bottom of the
meter. The battery icon on the LCD screen indicates the charge level.
Use a power adaptor that meets the safety specifications.
5
Warranty
You can read our warranty terms in our General Business Terms which you can find here:
https://www.pce-instruments.com/english/terms.
6
Disposal
For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
© PCE Instruments
7
Advertisement
Table of Contents
