Page 1
PCE Americas Inc. PCE Instruments UK Ltd. 711 Commerce Way Unit 11 Suite 8 Southpoint Business Park Jupiter Ensign way FL-33458 Hampshire / Southampton United Kingdom, SO31 4RF From outside US: +1 From outside UK: +44 Tel: (561) 320-9162 Tel: (0) 2380 98703 0...
How to set the sampling rate ....................... 10 5.7.8 How to format the SD card ......................10 Mains adaptor ........................... 11 System reset ..........................11 RS-232 interface ....................11 Patents ........................11 Batteries ......................... 12 Contact ........................12 PCE Instruments UK ........................ 12 PCE Americas .......................... 12...
SD memory card with a capacity of 1 … 16 GB. The values saved on the SD card as an xls file can be transferred to a PC for further analysis. The PCE-313A can work independently, without the user being present during the measurement as it can be programmed via the keypad in advance.
Manual Instructions How to select the function 1. Switch on the device by pressing the power key (2). If you hold the power key for more than 2 seconds, this will switch off the instrument. 2. The device has 4 functions: a) humidity and temperature b) dew point c) wet bulb...
Manual Max / Min function 1. This function saves the maximum and minimum values of a series of measurements. You can activate this function by pressing the REC key (4). “REC” is displayed. 2. When the “REC” icon appears in the display, you can retrieve the maximum value by means of the REC key (4).
Manual 5.5.3 Manual data logger function a) Set the sampling rate to 0 seconds (see settings chapter). Press the REC key (4) once so that the REC symbol appears in the display. After that, press the logger key (6). The REC symbol will start flashing and you hear the beeper.
Manual How to transfer data to a PC 1. After saving data to the SD card by means of the meter, remove the SD card from its slot (9). 2. Insert the SD memory card into the card reader of your computer. 3.
Manual 5.7.1 How to set the date and time 1. When “dAtE” is displayed, confirm your selection by means of the enter key (4). You can now set the value by means of the (5) and the keys (6). The year comes first. After setting the value, press the enter key (4) to get to the next value.
Manual Mains adaptor In addition to battery power supply, the device can also be powered by a 9 V dc mains adaptor. To do so, please use the 9 V input socket (12). If you use the device with the mains adaptor, it is always on. Thus, the power key (2) will not work.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use them or give them to a recycling company which disposes of the devices in line with law. If you have any questions, please contact PCE Instruments. Contact If you have any questions about our range of products or measuring instruments please contact PCE Instruments.