Operating Instructions; Switch On The Device; Switch Off The Device; Switch On The Display - PCE Instruments PCE-HT 112 User Manual

4

Operating instructions

If no key is pressed within 15 seconds, the automatic key lock is activated. Press the
for three seconds to make operation possible again.
4.1

Switch on the device

The data logger switches on as soon as batteries are inserted into the device.
4.2

Switch off the device

The data logger is permanently switched on and switches off as soon as the batteries are no
longer sufficiently charged to ensure proper operation.
4.3

Switch on the display

Press the key for three seconds and the display switches on.
4.4

Switch off the display

Press the key for three seconds and the display switches off.
Note: The display cannot be turned off when it shows REC or MK.
4.5

Switching the time / date

Press the key to switch between date, time and marker view.
4.6

Start data recording

Press the key for three seconds to start data recording.
4.7

Stop data recording

If the software has been set to stop recording, press the
recording.
Furthermore, recording stops when the memory is full or the batteries are no longer sufficiently
charged to ensure proper operation.
4.8

Display minimum, maximum and average measured value

As soon as one or more measured values have been saved to the memory of the data logger, it
is possible to display the MIN, MAX and average measured values by pressing the
If no measured values are recorded, the
alarm limits.
4.9

Deactivate the audible alarm

As soon as an alarm is triggered and the meter beeps, the alarm can be acknowledged by
pressing one of the two keys.
key can be used to display the upper and lower
© PCE Instruments
6
key for three seconds to stop
key
key.