Table of Contents
Advertisement
5.6
Hold data
Press the
key. The digital reading is held and the HOLD icon appears on the LCD.
Press the
key to switch between the readings of T1 & T2 or T3 & T4 at the main display and
the values of T1-T2 or T3-T4 at the sub-display.
Press the
key again to return to normal operation.
5.7
Recording mode
The PCE-T 394 has a data logger function. It records max. 32000 groups of data. The recorded
data can be read out via a PC.
1.
Start the recording: As default, recording is started by pressing a key. You can change
the start mode setting via the software. Please refer to the PCE software manual for
details.
2.
Set the interval: Before starting to record, set the sampling interval of the PCE-T 394
as described under 6.5 Setting the interval for data .
3.
Press the
recording.
4.
When the set number of records is reached, a FULL icon will be displayed at the bottom
of the LCD screen.
5.
Data can be deleted automatically by re-setting the recording elements.
6.
Read out the data: After recording, you can connect the data logger to a PC via the
USB port and with the PCE software, you can read out and analyse the data
accordingly. Please refer to the PCE software manual for details.
Note:
When the temperature data logger is at low battery, the recording function does not work and
data cannot be deleted. If you need to record for a long time, fully charge the battery or use the
AC/DC power adaptor for power supply.
Note:
When the instrument is in recording mode, unplug the probe and the LCD screen will display
ERR.
5.8
Data recording and software installation
This temperature data logger is able to record data in its internal memory. Before you can record
data, you need to install the PCE software on your PC. The latest version of this software and
detailed instructions on how to install and use it can be found at https://www.pce-instruments.com.
A CD with the software is included for your convenience but we recommend downloading the
latest version at the PCE Instruments website.
To set up the meter for recording, connect it to a PC via the micro USB port.
5.9
Auto Power Off
The APO function is set to ON by default. To turn off the APO function, press the
To extend the battery life, the temperature data logger will automatically turn off after about 10
minutes when not in use.
In recording mode or when the meter is connected via USB, the APO function is automatically
disabled until the memory is full or the set number of records is reached.
key to start recording, press the key again for 3 seconds to stop
© PCE Instruments
5
key lightly.
Advertisement
Table of Contents
