Table of Contents
Advertisement
Accessories
f
f
Setup
§Menu§
select a function:
Headset
If an original Siemens Headset is
used the profile is activated auto-
matically as soon as the headset is
plugged in.
User-definable settings
Auto answer
(factory default: off)
Calls are automatically accepted af-
ter a few seconds. You should there-
fore wear the headset.
Unwanted listening-in is possible!
Automatic settings
• Accept call with the Call key or
PTT key (Push To Talk) when the
key lock is activated.
• Activate voice dialling with the
PTT key.
• Swap using the PTT key.
• End call using the PTT key
(hold down).
Car Kit
If an original Siemens Car Kit is used
the profile is activated automatically
as soon as the phone is inserted into
the cradle.
Setup
Accessories
Modifiable settings
Auto answer
(factory default: off)
Calls are automatically accepted af-
ter a few seconds. Depending on
the setup the ignition may need to
be switched on.
%
Indication on the display.
Unwanted listening-in is possible!
Switch between the phone and
Car Kit Portable
-
Switch to headset during
a call (if the phone is con-
nected to Car Kit
Portable).
Auto off
(factory default: 2 hours)
The phone is powered by the car's
power supply. The time between
switching off the ignition and deacti-
vation of the phone can be adjusted.
Automatic settings
• Permanent illumination:
Switched on,
• Auto key lock: Switched off,
• Charge the phone battery,
• Automatically activate Car Kit,
when the phone is inserted.
HomeStation
These functions are only available
with the appropriate original
Siemens accessories (page 96).
83
Advertisement
Table of Contents
